Configuration Error Messages

 

 

Table 5-5 Routing Protocol Error Messages (continued)

 

 

bgp: This peer address <Peer> matches the

Peer address is the same as router ID of local router. Specify a peer

local router id <Address>

address different from router ID.

 

 

 

<Peer>: Specified peer address

 

<Address>: Local router ID

bgp4+: address should not be::

Default address is specified in address. Specify addresses other than

 

the local host address.

bgp4+: address should not be v4-compat

An IPv4-compatible address is specified in an address.

 

Specify addresses other than the IPv4-compatible address.

bgp4+: address should not be v4-mapped

An IPv4 mapped address is specified in an address.

 

Specify addresses other than the IPv4 mapped address.

bgp4+: as-count only makes sence with

An as-count parameter is specified using peers other than the

external peers

external peer. Do not specify the as-count parameter using an

 

internal peer and routing peer.

bgp4+: as-count optionis not supported the

An as-count option is specified in the policy group.

policy group

Specify an as-count option on the Export filter side.

bgp4+: as-override may only be used with

An as-override option is defined in peers other than the external

external peers

peer.

 

 

 

An as-override option can be used only in the external peer.

bgp4+: as-override option must be the same

as-override options are different in the policy group.

in the policy group

as-override options must be the same in the policy group.

bgp4+: aspath-opt option is not supported the

An Aspath-opt option is specified in the policy group. Specify an

policy group

Aspath-opt option on the Export filter side.

bgp4+: authmd5 must be equal to or greater

The designated authentication key is less than one character.

than one character

Designate the authentication key using between 1 and 80

 

characters.

bgp4+: authmd5 "<MD5>" longer than 80

The designated authentication key is longer than 80 characters.

characters

Designate the authentication key by using less than 80 characters.

 

 

 

<MD5> Specified authentication key.

bgp4+:autonomous-system not specified

The AS number to which this router belongs is not defined. Define

 

the AS number of a local router.

bgp4+: BGP4+ local-address <IPv6 Prefix> is

Defined lcladdr is except a global address or site local address.

not global/site-local IPv6 address

Define a global address or site local address in lcladdr.

 

 

 

<IPv6 Prefix>: Specified local address

bgp4+: clusterid may not be 0.0.0.0

0.0.0.0 is specified in cluster ID.

 

Specify cluster ID by except 0.0.0.0.

bgp4+: confederation peer must have the

Setting the peer between members requires the member AS number.

member AS

Specify the member AS number.

bgp4+: description "<Name>" longer than 64

The specified ID exceeds 64 characters. Specify ID by 64 or less

characters

characters.

 

 

 

<Name>: Specified identifier

bgp4+: description may only be used with

The description option is specified by other than peer group. The

peers

option for description shall be defined in the peer.

bgp4+: disable may only be used with peers

The disable option is specified by other than peer. The option for

 

disable shall be defined in the peer.

bgp4+: duplicate bgp4+ clause

The same peer was duplicated for definition. Do not define the same

 

peer.

bgp4+: duplicate BGP4+ group found, groups

Bgp4+ is double-defined. Delete one of the definitions.

must differ by type and/or AS

 

bgp4+: duplicate entries for peer <Peer>

The same peer was duplicated for specification. Do not specify the

found in group type <Type> AS <As>

same peer.

 

 

 

<Peer>: Specified peer address

 

<Type>: Specified peer group

 

<As>: AS number of specified peer group

 

 

GR2K-GA-0014

5-27

Ver. 07-02

 

Page 417
Image 417
Hitachi GR2000 Series manual Bgp This peer address Peer matches