Hitachi GR2000 Series manual Qos-tos-map, Dele e

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

5. Deleting settings:

a. Deleting the list in the group

To delete QoS IP frame condition list number 9 of the QoS IP frame condition group named ip1:

				showqos-					-list-groupip1
			iplist			18;
		};				3;
	q	s-ip		dele e					s-ip-list-groupip19
	(config)#							o	:
	b.	Deleting the
				To	l te the QoS IP frame condition group named ip1:
	settin s.			deleteqos-ip-list-groupip1
Related Commands
	q s-queue-
	q	s-interface
	q s-d card-mode9						groipuip1{
	q	s-ip-l st
	q	s-t -map
RelatedqosInformatipont
For the flow control, refer to the GR2000 A plications Guide.
Precautions
1. The determina ion									f QoS occurs in the order of the QoS IP frame condition list

number designated in the QoS IP frame condition group.

2. QoS IP frame condition group cannot be deleted while in use with IP QoS

3. If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

1.2.7 qos-tos-map

This command sets the TOS-QoS conversion table information. A maximum of eight entries (precedence) can be created.

1-196	GR2K-GA-0014
	Ver. 07-02