Hitachi GR2000 Series manual Configure as filter1, then as filter2 and filter3, No information

-drop

Cannot be omitted

This parameter sets whether you perform extended-filtering:

-yesindicates extended filtering, and no indicates -no extended

.

-no

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Displaying

Parametersshowextended-filtering[<No.>]

{-yesDescription:-no}

Default:

<Timeslot>{<LineDescription:Name>all<DLCI}ThisName>parameter<VCspecifiesName>the<PeernameName>of the<GroupinterfaceName>that

performs extended-filtering. When you specify all, all interfaces perform extended filtering. The DLCI name can be specified for Frame Relay, and the VC name and group name can be specified for ATM. The Peer Name can be specified for ISDN.

Default:

{-dropDescription:-forward}This parameter configures filtering operation: drop discards frames that match the filtering conditions, and forward relays frames that match the filtering conditions only to recipients specified by interface name.

Default:

filter1Description:-3{offdaSpecifiessadsapfilteringssapconditionsctl(chooseouifrompidthetypelist below)user. You}

	can configure up to three items; however, only one item can be
	set at a time. For example, when configuring three items, first
	configure as filter1, then as filter2 and filter3.
off:	No information
da:	Recipient MAC address (6 octet)
sa:	Sender MAC address (6 octet)
dsap:	Recipient SAP (1 octet)
ssap:	Sender SAP (1 octet)
ctl:	Control field (1 octet)
oui:	Organization code (3 octet)
pid:	Protocol ID (2 octet)
type:	Type field when the format is Ethernet.
user:	Specifying any user defined fields.
Default:	off

2-36	GR2K-GA-0014
	Ver. 07-02