Hitachi GR2000 Series manual Peer must be agreed with the AS number of the own device

	Configuration Error Messages
Table 5-5 Routing Protocol Error Messages (continued)
bgp4+:only one choice the gateway option or	Both gateway option and multihop option is defined. Define a
the multihop option	gateway option or multihop option.
bgp4+: only one choice the gateway option or	Both gateway option and multihop option is defined. Define a
the set-nexthoppeer option	gateway option or setnexthopper option.
bgp4+: only one choice the refresh option or	Both refresh option and refresh-128 option is defined. Define a
the refresh-128 option	refresh option or refresh-128 option.
bgp4+: out of range	The parameter-specified range is exceeded in the input command
	syntax. Numeric values of more than 4294967296 are contained.
	Reconfirm a parameter.
bgp4+: permit-asloop may only be used with	The permit-asloop option is defined for other than external peers.
external peers	This option may only be used for external peers.
bgp4+: policygroup can be used in same	The settings of confederation parameters in the policy group are
group type	different. The settings of confederation parameters in the policy
	group must be the same.
bgp4+: policy-group may only be used with	Policy group is specified by other than external peer. The group
external groups	cannot be used by other than external peer.
bgp4+: policy-group should be used in the	Policy group is specified by other than peer group. Specify the group
group declaration only	as peer group option.
bgp4+: remove-private-as may only be used	The remove-private-as parameter is specified by other than the
with external peers	external peer. Do not specify the parameter by using the other peer
	than the external peer.
bgp4+: remove_private_as option must be the	The settings of remove-private-as parameters in the policy group are
same in the policy group	different. The settings of remove-private-as parameters in the policy
	group must be the same.
bgp4+: routerid not specified:BGP4+ requires	Router ID is not defined. Specify the router ID.
it
bgp4+: setnexthoppeer option is not	The setnexthoppeer option is defined in other than the internal peer.
supported this group type	Do not specify the setnexthoppeer parameter in other than the
	internal peer.
bgp4+: syntax error	Syntax error
bgp4+: the BGP4+ local AS (<As1>) peer AS	The As number in the internal peer is different from the AS number
(<As2>) must be same for internal peers	for the own device. The AS numbers for the internal peer and routing
	peer must be agreed with the AS number of the own device.
	<As1>: memberAS number of local router
	<As2>: AS number of the counterpart device.
bgp4+: the holdtime for BGP4+ group peers	The hold timer value specified in a BGP4+ peer group is lower than
(<Value>) is less than minimum permitted (3)	the permitted minimum value. Define the hold timer value by 0 or 3 or
	more.
	<Value>: Specified hold timer
bgp4+: the holdtime for BGP4+ peer <IPv6	The hold timer value relative to the specified peer is smaller than the
Prefix> (<Value>) is less than the minimum	allowed minimum value. Define the hold timer value by 0 or 3 or
permitted (3)	more.
	<Value>: Specified hold timer
bgp4+: the lcladdr option should be used in	An lcladdr parameter differs from that defined in a peer group.
the group declaration only	Do not specify the different lcladdr parameter by using the internal
	peer and routing peer.
bgp4+: the local as can not be used in	The Local-as option is defined for other than external peers. This
confederation	option may only be used for external peers.
bgp4+: the metricout option should be used in	The metricout parameter is different from the one specified by the
the group declaration only	peer group. Do not specify the different metricout parameter by using
	the internal peer and routing peer.
bgp4+: the metricout option should be used in	The metricout parameter is different from the one specified by the
the group declaration only in case of internal/	peer group. Do not specify the different metricout parameter by using
routing peers	the internal peer and routing peer.
GR2K-GA-0014	5-29
Ver. 07-02