Hitachi GR2000 Series manual Dns-resolver, Operation Management Information Precautions

GR2K-GA-0014 Ver. 07-02

To set DNS resolver function:

Operation Management Information

Precautions

Multiple host names must not be defined to the same IP or IPv6 address.

“localhost” must not be defined as the host name.

“127.*.*.*” must not be defined as the IPv4 address.

The class D or class E address must not be defined as an IPv4 address.

Global address and site local address may be specified as the IPv6 addresses.

If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

Host names are not distinguished with capital letters and small letters.

￿Do not set multiple IP and IPv6 addresses in the same host name.

4.1.2dns-resolver

Function

Sets DNS resolver information.

Input Format

To set own host name:

To set domain name:

To set name server:

-hstnameo<hostAddress>nam

nameservrdmain<Localdomainname>

<IP

To	delete[set]	dns-	--hoslaytname		4-3
	the dnsrelay-resolverfunction’{yeseffectiveness{yesno}				and ineffectiveness:
To delete DNS			information:-relay	no}

To delete name server:
To delete the relay function setting information:
To	own host name: namerver<IPAddress>