Hitachi GR2000 Series manual Sets the Vlan ID of tag-VLAN, Input side, General port number

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

[vlanDescription:<VLANID>]	Sets the VLAN ID of tag-VLAN.
	The list information that sets this parameter should be set in
	(Inbound) and specified as the flow detection conditions on the
	input side.
Default:	Undefined. (VLAN ID is not contained in the flow detection
	conditions.)
Range of value:	1 to 4095 (This parameter is valid only in RP-C and RP-D.)

[<PortTransmitterSource>]port numbers are designated.

If port number to be designated is one: nnnnn

If port number is designated by range:nnnnn-nnnnn

Default:	None (the transmitter port number is not included in the flow
	detecting condition.)
Range of value:	0 to 65535 (decimal). (Please refer to Table 1-24.)

[<PortDestinationDestination>]port numbers are designated.

If port number to be designated is one: nnnnn

If port number is designated by range:nnnnn-nnnnn

	Default:	None (the transmitter port number is not included in the flow
		detecting condition.)
	Range of value:	0 to 65535 (decimal). (Please refer to Table 1-24.)
	Table 1-24 General port number
	Number (Decimal)		Name
	20/tcp		File Transfer [Default Data]
	21/tcp		File Transfer [Control]
	22/tcp		Secure Shell Login
	23/tcp		Telnet
	25/tcp		Simple Mail Transfer
	53/tcp 53/udp		Domain Name Server
	80/tcp		World Wide Web HTTP
	110/tcp 10/udp		Post Office Protocol - Version 3
	161/udp		SNMP
	TCP single-direction communication permit (having one ACK flag) is
	designated.(note1)
	[ack]Default:	None (the ACK flag is not included in the flow detecting
		condition.)
	Range of value:	None
	[syn]Virtual circuit establishment permit (having one SYN fla) is designated.(Note1)
1-32				GR2K-GA-0014
				Ver. 07-02