Hitachi GR2000 Series manual Definition information name

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 5-3 Network Interface Error Messages (continued)

Mcr not specified.	MCR not specified. Set MCR.
Minimum rate is greater than server rate2.	The minimum transmission throughput during control under heavy
	congestion exceeds the minimum ratio of 2 of transmission
	throughput to the net under changing heavy congestion. Adjust
	settings so as to reduce the minimum throughput during control to
	below the minimum ratio of 2 of transmission throughput to the net
	under changing heavy congestion
Monitored events counter is less than error	Link quality monitored event interval is less than the error threshold
threshold.	of link quality. Set the value so the link quality monitored event
	interval is no less than the error threshold of link quality.
NIF board is not mounted.	Type of the mounted device is not found. Mount device.
NIF board type is mismatched.	Specified type is different from type of mounted device. Specify type
	of mounted device.
NIF No. out of range.	Specified NIF number exceeds maximum value. Check the NIF
	number.
No pvc detection id less than value multiplied	The PVC unavailability message receive count is less than the value
by t391 dte timer and error threshold.	multiplied by the status inquiry request message send interval and
	the error frequency used for detecting falling. Set the value so the
	PVC unavailability message receive count is no less than the value
	multiplied by the status inquiry request message send interval and
	the error frequency used for detecting falling.
No such ATM configuration.	No such ATM configuration. Confirm the specified name.
No such name <name>.	Specified configuration information name not found. Specify existing
	definition information name.
No such set index.	An entry cannot be set on specified entry number.
	Use entry number not exceeding the set number of entries. To add
	entries, use the number of set entries +1 for entry value.
No such vp configuration.	No such vp configuration. Confirm the specified name or vp value.
Pcr not specified.	Pcr not specified. Set PCR.
Phone number not specified.	Own phone number not specified. Set the own telephone number to
	Dch line.
Relations between aps and line (aps	Relations between aps type and line (aps protection) are
protection) are inconsistent.	inconsistent. If the APS lines are set in the same NIF, set the APS
	operation switch to ON.
Relations between aps_protocol, revertive	Relations between aps_protocol, revertive and directional are
and directional are inconsistent.	inconsistent. Set the correct value.
Relations between authentication protocol	Relations between authentication protocol and phone number1 are
and phone number1 are inconsistent.	inconsistent. When authentication protocol is no, set peer’s phone
	number and subaddress 1.
Relations between authentication protocol	Relations between authentication protocol and user name and
and user name and password are	password are inconsistent. When authentication protocol is other
inconsistent.	than no, set own user ID and own password.
Relations between authentication protocol	Relations between authentication protocol and user name and
and user name and password are	password are inconsistent. When authentication protocol is other
inconsistent.	than no, set own user ID and own password.
Relations between cir and bc are inconsistent.	Authentication burst size is greater than transmission throughput/
	8x40. Specify the authentication burst size not exceeding
	transmission throughput/8x40.
Relations between echo trial times and echo	Relations between echo trial times and echo success times are
success times are inconsistent.	inconsistent. Set standard value of link quality OK to the trial count of
	link quality judge or less.
Relations between inverse arp and local	Although the PVC status check protocol is no, the InARP address
management (frame relay) are inconsistent.	solving execution is on. Turn off the InARP address solving
	execution switch.

5-10	GR2K-GA-0014
	Ver. 07-02