Hitachi GR2000 Series manual Display settings, Default Cannot be omitted

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Display settings

Parametersshow<TimelotName>qos-ip[{<Line<PeName>erName>><VPVC<VCName>Name><DLCI}]Name><GroupName>

<VC{<LineDescription:Name>Name>}<DLCISets the name<Groupof the relevant<TimeslotinterfaceName>established<Peerin Name>IP or

	IP-addresssettings. (Before entering this command, establish
	IP or IP-address settings.)
Default:	Cannot be omitted
{-inDescription:-out}	Sets inbound/outbound. Set inbound, outbound, or both
	simultaneously for one interface.
:	Inbound (setting frame input side)
out:	Outbound (setting frame output side)
Default:	Cannot be omitted.

-ip_Description:listgroup<qos-Setsip-listQoSgroup-IP frameName>condition group names. (Before entering this command, establish the QoS IP frame condition group.)

Default: Cannot be omitted.

Examples

1. Setting parameters (settings are inbound)

To set IP frame condition named ip1 in the interface named office1:

2. Sett ng param ters (settings are inbound and outbound)

To et the IP frame ondi on s named ip1 and ip2 respectively in the

interfaceqos-ipoffice1delineipqosshowqosignatedoffice1-yesip-listinp-ce1ipoffice1nbound-ce1703groupethernetlist.10in-.groupip1and0ip.1-0/3outboundlst0p124igroup;.ip1

1-202 (config)#qos-ip office1outnipiplistoutgroup-iplistip1ip2;;ip2

GR2K-GA-0014 Ver. 07-02