Hitachi GR2000 Series manual Filtering-database, IPX/Bridge Information Related Commands

IPX/Bridge Information

Related Commands

bridge line

Precautions

If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

2.2.3filtering-database

By using filtering-database (FDB), you can delete and relay the frame, based on the source and destination MAC addresses. You can set the aging timer value and static entry.

Input Format

Defining

Modifying[set]filtering[{<PeerVCdropName>forward-dat<Peertabase<Group}{<Line[ageingScon>]NoName>Name><Timeslot>}slot>}<DLCIMACDLCI<Tislot>}]NaAddress><VCName>

Inserting	Name>op	rdName>}][{<Line<Group<MACAddress>Name>.>[<MACmeName>Address>]
Deletingdeletefilteringinsrt Name>-		}{<LineName><No.>	Na	<VCName>

Displaying

show-database

Parameters

-ageingDescription:<Second>This parameter sets the age-out timer for dynamic entries in the filtering database.

Default:300

Range of value 10-1000000

GR2K-GA-0014	2-33
Ver. 07-02