Hitachi GR2000 Series manual GR2K-GA-0014

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Precaution

1.Confirm if the specified SMTP server information (host name or IP address, port No.) matches to the one defined to destination SMTP server. If the connection with SMTP server at the sending of e-mail fails, the mail is discarded.

2.This function can be used only with IPv6. Therefore, if the host name with the IPv6 only defined is specified with hosts (host name information) in the SMTP server, the E-mail addressed to the said server is discarded.

3.If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

4.When using e-mail messages and log e-mail simultaneously, do not set more than 1 entry for log e-mail destination address and 1 entry for SMTP server. If defined with more than 1 entry, e-mail transmissions may be delayed several minutes beyond the set time due to entry count and the load conditions of the SMTP server used for log e-mail and e-mail messages.

4-14	GR2K-GA-0014
	Ver. 07-02