Hitachi GR2000 Series manual Related Commands, Related Informati n

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Display of blank list number in the specified range:

Display all blank list numbers in the range in which the list number is 1 to 100 on the Inbound (input) side of interface Tokyo.

Display of top blank list number in all list numb rs:

Display the top blank list number in the list numbers on the Inbound (input) side of interface Tokyo.

	￿	Display of top blank list number in	he speci ied range:
		Display the top blank list number n the ra ge in which the list number is 51
		to 100 showflowon the InboundqosTokyo(input)insidelist1of interface-100freeTokyo.
	Freenumber:5,7,15-100
	(config)#
Related Commands
	￿
	fl	w, flow qos, filter, filter-li t, qos, qos-ip-	, qos-tos-map, nat, nat inside interface, nat

Related Informati n

None

Pre autions

1. The filter flow is determined in the order of the list number designated in the input/output interface of the filter IP flow information (the i dication order when show flow filter is executed).

2. This command cannot be set when setting the filter-list (filter list information) or qos- p-list (Q S IP frame condition information). Del te all of the filter-list and qos- p-list before setting this command.

(config)#Free(config)#Freeoutside￿number:number:interfaceshowshowflow551flowqosqosTokyoTokyoininfreelist min51-100nofreeminno

3. The nput form for the filter flow information includes two forms: the flow filter constituting definition information and the filter-list, filter-group and filter-interface constituting definition information. Features by each input form are shown in Table 1-9.

4. Flow information consumes 101 entries in each RP when address conversion (nat) is set. Therefore, when address conversion (nat) is set, the maximum entry count is decreased by 101 per RP capable of flow information definition.

1-42	GR2K-GA-0014
	Ver. 07-02