Hitachi GR2000 Series manual Send RIP packet, Send SAP packet Default

Default:

Range of value:

Default:

Range of value:

IPX/Bridge Information

{-nonDescription:periodic_rip_Thissend_parameteroff-nonis_periodicthe RIP packetripsend’ send}switch when there is a change in the network where the RIP Request reply and the local router can be routed at start-up.

__rip_(Do notoffsend RIP packet.)

	(Send RIP packet.)
Default:	-non periodic_rip_send

{-Description: _sapThis parameteroff-nonis periodicthe SAP packetsapsend’ send}switch when there is a change in the server by which the SAP Request and the local router can be routed at start-up.

non_ _sap_(Do notoffsend SAP packet.)

(Send SAP packet.)

Default:

-periodicDescription:ripintervalThis-non<Minute>parameterperiodic_sapspecifiessendthe send interval (minutes) of the periodic RIP packet.

1

0-1440(0 does not deliver this packet periodically)

-periodicDescription:sapintervalThis<Minute>parameter specifies the send interval (minutes) of the periodic SAP packet.

1

0-1440(0 does not deliver this packet periodically

{-nearestDescription:sap_replyThis-nearestparametersapsetsreplythe_operationoff}of the nearest SAP for the relevant interface. The following operations may be executed.

:

Reply to the nearest SAP request even when this interface already has the SAP information for the service type with the nearest SAP request. However, the reply information does not contain the SAP information learned by the nearest SAP request receive interface.

_off :

Do not reply to the nearest SAP request when this interface already has the SAP information for the service type with the nearest SAP request.

Default:-nearest_sap_reply_off

GR2K-GA-0014	2-5
Ver. 07-02