Hitachi GR2000 Series manual Extended-filtering, Delete

IPX/Bridge Information

Related Commands

bridge bridge-interface line

Precaution

1.The value specified for ageing is ageing out within the range of the value that rounded out by 10 seconds unit. For example, when 30 to 39 is specified, ageing out in 40 seconds.

2.If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

2.2.4extended-filtering

You can set extended-filtering information to delete and relay the frame, based on bit pattern of the specific field designated by the MAC or data link header. Also you can use the BIT pattern of the arbitrary frame field.

You can set a maximum of three filtering entries. The parameter fields are the same in all three entries.

Input Format

Defining

Modifying[set]<Tims<Vue[da{e<Lixtelot>nsa}]dedName>{-filtering-dsdropask<Mask>][<DLCIssapforward[{Name>yesctl}[{filter1-lengtho<VCui}]<Length>]Name>pidfilter2<Petype[-offName>usefilter3<Offset>]}]<Group[<Group-}val{offName>

	Inserting[set]Nam>[{xtendndedda<TLNae>imslot>sa-[{-filteringmdapdrop<DLCIforwardsap[{Name>yesctllength<Length>]offset}][{filter1nooui<VC}]<oName>.pidfilter2typ<PeNamus}][-value}{off
	Deletinginsrt		<No.
GR2K-GA-0014		<Timesot<Lineal>Name><DLCI{-dropmaskk>]dsap		[}-<VCNam	2-35
Ver. 07-02					<Pefilypeuser[-Name><Group}{offName>
		delete