Hitachi GR2000 Series manual 180 GR2K-GA-0014 Ver

Unused

-replace_tos <New_Tos Value>:0-255(Note 2)

This parameter makes the function of QoS control by TOS input valid.

When this parameter is set, -priority_class,-discard_class, and -replace_toscannot be set.

(output-prioritypriorityclassclass,4-discardflow controlclassby4setting queuing priority class)

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Default:-priority_class 4 -discard_class 4(output priority class,

flow control set by queuing priority class)

range of value:

[-tosDescription:map]

Default:

-upcDescription:{no<Bandwidth>}This parameter sets the use of the agreed band monitoring function and the agreed band.

Sets the agreed band in bit/s. If the number is greater than the circuit speed, performance ends.

Default:	upc no
Range of value:	<Bandwidth>:0-1000000000(0-1G)
	If number from 0-11999set, performance continues, as the
	contract field is 12000 [bit/s].

-upcmodifiedDescription:penaltypriority{drop_classThis<Modifiedparameter<No.>}New_setsTostheValue>performance-modifiedat thediscardtime ofclass<Nothe										.>
			violation of the agreed band.
			Drops the frame.
<MdifiedNew_TosSetsValue>:the number replacing TOS or DS field of Diff-serv, and
no:			QoS control by replaced TOS or DS field of Diff-serv. The upper
			6 bits of the TOS or DS field of Diff-serv field are replaced. The
<Bandwidth>:			lower 2 bits are ignored even if this parameter set.
	27	26	25	24	23	22	21	20
	Pprecedence			D	T	R	Unused
		High-order 6 bits are designated.
D (Delay),T (Throughput), R (Reliability)
	27	26	25	24	23	22	21	20
			DSCP					CU
	High-Order 6 Bits are Designated.
DSCP (Differentiated Services Code Point), CU (Current Unused)
drp:
1-180									GR2K-GA-0014
									Ver. 07-02