Hitachi GR2000 Series manual Related Configu a ion Object, Buckets

SNMP Information

1. Show the registration status of RMON Ethernet history-group control entry.

2. Delete registered RMON Ethernet history-group control entry with index number
	(confg)#33, and show historyul-ingcotrolhistory-group control entries:
							33	{	2
	hstrycont ol45
Related Configu a ion Object
					f		kyoto;osaka		3
	line	buckets
	snmp	int			val2000;
		owner				"ncerequested-mgrken"0;
Related};Informati
The MIB val				of an RMON Ethe net history group can be referenced using an SNMP
manager or this rout							’ snmp command. For the snmp command, refer to the
GR2000 Ope ations Comm								n	s, Vol. 1.	33
Pre autions			d				tory-
			show					-co
1. In orderhstryto accesscontolthe45{history-group control information from an SNMP Manager,
	you must r gif					ter theaka;SNMP Manager.
		buckets					equested
2. When RMON historyControlTable is sent from an SNMP Manager, the change is
	not reflectedintletevinathe2000;router’s configuration.
			wner			"nhistoryce-mgrke"control30;

3. (config)#Prior};to deleting any line information, delete the relevant history-group control entry (or entries) first.

4.When IP information is deleted or NIF is closed, you cannot monitor histories on those interfaces. The response will show “invalid(4)” for the value of “History Control Status.” Such response may take longer than expected if the period value is set to a high value (estimated response time is half the period value).

5.If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

GR2K-GA-0014	3-11
Ver. 07-02