Hitachi GR2000 Series manual Grup

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

e.To delete the queue number "two" in the interface names: "office1" and "group 1" that have set the group band control.

(config)#howqos-intera

qosyes{

qos-interfaceoffice1{

1

grup

1

pekrate20000{constantpeak

peak_rate8000;

2

3

Related Commands

8

qos

office1

qos-queue-list

2

6

3

guaranteemin

4

qos-di card mode

4

qos- p-list};

};qos- p-list-group

qs-inteface

-group1-traffic2

(config)#deleqos-tos-map

qosyes{

{

qos-ip

qos-interface

office1

1

qos-ipx

qos-bridge

qos-hdlc, line, timesl t, ppp, me-relay, dlci

3

group

2pekrate

constantpeak

Precautions

20000{

8

1. This command cannot be used withoffice1ATM.

2

6

3

4

2. When the operating configurat ons stored in memory are modified, the modified

traffic

4

guaranteemin_rate

2000;

interfaces will restart. Use caution when logged in through a network.

};

3. };If this command is inputted in the cases where changes are made on the IP

routing protocol information, the IP multicast protocol information, and the

MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

4. This command cannot be set when a -cops parameter is set to qos (QoS information).

1-164	GR2K-GA-0014
	Ver. 07-02