Hitachi GR2000 Series manual When specifying port numbers within a range, Range of value 65535

	Filtering/QoS Information
	When specifying port numbers within a range:
Default:	Undefined-portsource<PortNo.>-<PortNo.>
Range of value:	0–65535

-portDescription:destination<PortSpecifiesNo.>[the-<PortdestinationNo.>]upper protocol port number. When both destination and source upper protocol port numbers are set under one condition, set so that the specified upper protocol port numbers do not overlap. If they overlap, set an upper protocol port number’s pair switch as -port_pair_off. (Note 1)

When specifying only one port number:

	When-port_specifyingdestination<Portport numbersNo.>within a range:
Default:	Undefined	No.>-<PortNo.>
Range of value:	0–65535

{-pairDescription:synchronized_Specifiesoffsynchronizedpairthe synchronizationchronized}check method for the IP address and the upper protocol port number as follows:

: Only checks for not switching source

			off
	IP address with destination IP address and source upper
	protocol port number with destination upper protocol port
	number. However, when -ip_pairor -port_pairis specified,
	this option performs checking according to that parameter
	settingpair-	.
			: Checks for not switching source IP
	address and switching source IP address with destination IP
	address and source upper protocol port number with
	destination upper protocol port number (see Note later in this
	subsection). When you specify this option, set the IP address
	switch and the upper protocol port number pair switch to
	(-ip_		_off, -port_pair_off).
	When specifies this parameter, define 6 (TCP) or 17 (UDP) to
	protocol parameter. If -protocol is undefined or defined other
	than 6 (TCP) or 17 (UDP), this parameter becomes invalid.
Default:	Off

GR2K-GA-0014	1-115
Ver. 07-02