Hitachi GR2000 Series manual Limits, This parameter specifies values corresponding to

Filtering/QoS Information

Default: None (upper-level protocols are not flow-detection conditions).

Range of value: 0-255

{Length>}payload-Description:length_uperThislimitparameter-payloadenghspecifies IP userlowerdata_limitlength }upper<Payloadand lower

limits.

payloadSpecifieslengthIP user uppdataerlengthlimitupper limit.

Specifies IP userlowdata length limit.

Table 1-84 Relationship Between IP User Data Length Upper/Lower Limits and IP User Total Data Length

		Relation between packet value A (packet
Upper/Lower Limit Specification		value= total length - header length) and		Result
		configured IP user data length B
-	_length_upper_limit	A	< or = B	Match
-	_length_upper_limit	A	> B	Mismatch
-	_length_lower limit	A	> or = B	Match
-payload_length_lower_limit		A	< B	Mismatch

Default:		None (IP user data length upper and lower limit values are not
		flow detection conditions).
Range of value:	0-65535
-tosDescription:<Value>		This parameter specifies values corresponding to the 6
		high-order bits in a TOS field or a DS field of Diff-serv, and
		compares these to the 6 high-order bits of a received packet
		TOS field or a DS field of Diff-serv.
		The two low-order bits are ignored; specification is invalid.
	27		26	25	24	23	22	21	20
		Precedence			D	T	R	Unused
		High-Order 6 Bits are Designated.
D (Delay), T (Throughput), R (Reliability)
	27		26	25	24	23	22	21	20
				DSCP					CU
		High-Order 6 Bits are Designated.

DSCP (Differentiated Services Code Point), CU (Current Unused)

Default:	None (TOS values are not flow detection conditions).
Range of value:	0-255(see note 2)
GR2K-GA-0014	1-171
Ver. 07-02