Hitachi GR2000 Series manual Attribute-list invalid BGPBGP4+ metric

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 5-5 Routing Protocol Error Messages (continued)

attribute-list: invalid {BGPBGP4+} metric	The specified MED number is invalid. Specify within the range of 0 to
value at <Metric> not in range 0 to 65535	65535.
	<Metric>: Specified MED number.
attribute-list: invalid index number in extended	The extended community ID number is invalid. Specify within the
community number value at <Value> not in	range of 1 to 65535, or 0 to 4294967295.
range 0 to { 65535 4294967295 }	<Value>: Specified ID number.
attribute-list: invalid localpref offset value at	The specified LOCALPREF offset number is invalid. Specify within
<Localpref> not in range 1 to 65535	the range of +1 to +65535 or -1 to -65535.
	<Localpref>: Specified LOCALPREF offset number
attribute-list: invalid localpref value at	The specified LOCALPREF number is invalid. Specify within the
<Localpref> not in range 0 to 65535	range of 0 to 65535.
	<Localpref>: Specified LOCALPREF number
attribute-list: invalid number of aspath value at	The specified ASPATH value is invalid. Specify within the range of 1
<Value> not in range 1 to 8	to 8.
	<Value>: Specified ASPATH number
attribute-list: invalid number of communities	The specified community count is over. Specify a value of 25 or less.
value at <Value> not in range 0 to 25	<Value>: Specified communities value
attribute-list: invalid number of extended	The number of extended communities to be defined exceeds the
communities value at <Value> not in range 0	maximum number of extended communities to be defined. Specify a
to 25.	value of 25 or less.
	<Value>: Extended communities value.
attribute-list: invalid octet value at <Value> not	More than 255 values are defined in dot notation. Specify value
in range 0 to 255.	within the range of 0 to 255.
	<Value>: Specified value
attribute-list: invalid range end: <Value>	m>n or n is 0 in specifying of aspath_term {m ,n}. Specify the starting
	value smaller than the terminating value. Or, specify terminating
	value to other than 0.
	<Value>: Specified terminating value (n)
attribute-list: invalid range start: <Value>	m is 0 in specifying of aspath_term {m, n}, {m}, {m,}. Specify other
	than 0.
	<Value>: Specified starting value (m)
attribute-list: out of range	The parameter-specified range is exceeded in the input command
	syntax. Numeric values of more than 4294967296 are contained.
	Reconfirm a parameter.
attribute-list: syntax error	Syntax error
autonomoussystem: autonomous-system	The autonomoussystem definition is duplicated. Delete one of the
already specified	two.
autonomoussystem: invalid autonomous	AS number specification range is illegal. Specify value within the
system value at <Value> not in range 1 to	range of 1 to 65534.
65534	<Value>: Specified As number
autonomoussystem: out of range	The parameter-specified range is exceeded in the input command
	syntax. Numeric values of more than 4294967296 are contained.
	Reconfirm a parameter.
autonomoussystem: syntax error	Syntax error
autonomoussystem6: autonomous-system	The autonomoussystem6 definition is duplicated. Delete one of the
already specified	two.
autonomoussystem6: invalid autonomous	IPv5 AS number specification range is illegal. Specify value within
system value at <Value> not in range 1 to	the range of 1 to 65534
65534	<Value>: Specified As number
autonomoussystem6: out of range	The parameter-specified range is exceeded in the input command
	syntax. Numeric values of more than 4294967296 are contained.
	Reconfirm a parameter.
autonomoussystem6: syntax error	Syntax error
5-22	GR2K-GA-0014
	Ver. 07-02