Hitachi GR2000 Series manual Ver.07-02, Line=0

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

2.When exp is specified as a flow detection condition parameter by qos-ip-list,the entry is enabled only on in designation. out designation is disabled. The entry is enabled only on the core router in an MPLS network. The entry and exit edge routers in an MPLS network are disabled.

3.When exp is specified as a flow detection condition parameter by qos-ip-listor -replace-expis specified as a flow control parameter, only the interface designation in RP after RP-C or RP-D is enabled to the IP QoS information. The interface designation in RP except described above is disabled.

4.If this command is inputted in the cases where changes are made on the IP routing protocol information, the IP multicast protocol information, and the MPLS information, and the apply command is not being executed, the apply subcommand is executed before the command is executed, and the changed IP routing protocol information, IP multicast routing protocol information, and MPLS information are reflected to the operation.

GR2000

Group Name: tokyo1 192.168.10.1/24

Outbound

GR2000￿

NIF=0

Line=0

NIF=1

Line=0

NIF=2

Line=0

VPI/VCI=0/32
VPI/VCI=0/33	ATM line
VPI/VCI=0/34
Inbound
Outbound
VPI/VCI=1/32	ATM line￿
Inbound
VC Name: tokyo2
192.168.20.1/24

Line Name: tokyo3 192.168.30.1/24

WAN line

Line Name: tokyo4 192.168.40.1/24

NIF=3	Ethernet line￿
Line=0
	Inbound
Figure 1-12 Effect of QoS Configuration Definition Output Priority in ATM Line
1-204	GR2K-GA-0014
	Ver.￿07-02