Hitachi GR2000 Series manual Flow Detecting Condition Parameters, General Protocol Number

	Filtering/QoS Information
Default:	Default is possible only in the indicated case. All the lists are
	displayed at default.
Range of value:	1 to 20,000 (ten-decimals)

[listDescription:<ListNo.>-listThe<listrangeNoof.>]the list number to be treated for display corresponds to the whole list number including IPv4 QoS and IPv6 QoS lists.

Default:	The range of the list number to be displayed corresponds to all
	list numbers.
Range of value:	IPv4 QoS list:	1-20000 (decimal)
	IPv6 QoS list:	40001-60000 (decimal)
feeDescription:	Displays the blank list number.
Default:	Cannot be omitted when the blank list number is displayed.
min_Description:no	Displays the top blank list number in the specified range.
Default:	Cannot be omitted when the top list number of a blank list
	number is displayed.

Flow Detecting Condition Parameters

{ipDescription:<protocolNo.Specifies>tcptheudphigh-icmp6order protocol} number of the protocol name. If all the protocols are taken as the object, ip is specified.

Default: No default is possible.

Range of value: 0 to 255 (ten-decimals). (refer to Table 1-48.) In the case of an IPv6 QoS list, protocol numbers that show the IPv6 option header cannot be designated. Specifically, they are 0 (relay point option header), 43 (route control header), 44 (fragment header) and 60 (terminal point option).

Table 1-48 General Protocol Number

Protocol No.	Protocol
1	ICMP
6	TCP
8	EGP
17	UDP
58	ICMPv6
88	IGRP
89	OSPF

GR2K-GA-0014	1-89
Ver. 07-02