Hitachi GR2000 Series manual Specifies the Icmp code number in decimal, Igmp Type Number

		Filtering/QoS Information
ccodeDescription:	Specifies the ICMP code number in decimal.
Default:	Undefined
-igmpRangetype<Noof value:.>	0–255
Description:	Specifies the IGMP type number in decimal. When specifying
	this parameter, define 2 (IGMP) to -protocol. If -protocol is
	undefined or defined other than 2 (IGMP), this parameter
	becomes invalid.
Default:	Undefined (Does not include IGMP type to the -filter condition.)
Range of value:	0–255
Table 1-63 IGMP Type Number
IGMP Type No. (h)	Input Value (Decimal)	Name
0x11	17	Membership Query
0x12	18	Version 1 Membership Report
0x13	19	DVMRP protocol
0x16	22	Version 2 Membership Report
0x17	23	Version 2 Leave Group
0x22	34	Version 3 Membership Report

-branchDescription:index<No.>Specifies the connection branch index number (specified by the DLCI-group information or VC-group information) in decimal. When a packet that matches the filter condition is relayed, the DLCI/VC specified in the group is selected and transmitted. Select the filter list information that sets the connection branch index number as a transmitter’s filter condition by means of -out(outbound) parameter of the filter-interfaceobject.

Default: Undefined

Range of value: 0–7

-policyDescription:routing<InterfaceEnablesName>the policy<IPAddress>routing function by specifying the destination interface name (same as the line name set by the ip object) and the next hop IP address. The policy routing function causes the local device to relay a received packet to its destination if it matches the filter condition. Select the filter list information that sets the policy routing as a receiver’s filter condition by means of –in(inbound) parameter of the filter-interfaceobject.

Default:	No policy routing
Range of value:	name: One of the line names set by the ip object.

GR2K-GA-0014	1-119
Ver. 07-02