Hitachi GR2000 Series manual One already defined for labelswitchedpath. To delete from

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Table 5-10 MPLS Information Error Messages [ROUTE-OS7] (continued)

mpls: duplicate explicit_route_name ’<ER	The name is in existence. Use the explicit_name which is not used
name>’	other blocks.
	<ER name>: Specified route name
mpls: duplicate label_switched_path_name	The name is in existence. Use the label_switched_path_name which
’<LSP name>’	is not used other blocks.
	<LSP name>: Specified LSP name
mpls: duplicate l2transport	Duplicate definitions.
mpls: duplicate lsp path to same destination	The LSP to the same destination is in duplicated definition.
’<address>’
	<Address>: Specified address.
mpls: duplicate lsr	This is a duplicated definition.
mpls: duplicate platform_label_range	This is a duplicated definition.
mpls: duplicate topology_driven	This is a duplicated definition.
mpls: explicit_route is empty with used ’<ER	The empty explicit_route is used.
name>’
	<ER name>: Specified route name
mpls: interface not found at ’<Interface	The specified interface does not exist.
Name>’	Set the interface name correctly.
	<Interface name>: Interface name
mpls: invalid platform_label_range value	platform_label_range value is out of range. Specify label value within
’<Label>’ not in range 16 to 1048575	the range of 16 to 1048575.
	<Label>: Label value
mpls: invalid platform_label_range value	platform_label_range value is out of range. Specify within the range
’<Range>’ not in range 16 to 1048575	of 16 to 1048575.
	<Range>: Range value
mpls: invalid vpn <VPN> IP configuration	<VPN> of IP information <Name> is invalid. Set proper <VPN>.
<Name>.
	<Name> Name assigned to the configuration definition information
	<VPN> VPN defined in the configuration definition information
mpls: l2transport not specified ’<Interface	The L2 transport is not set.
Name>’	Set the L2 transport in the line definition.
	<Interface name>: Interface name
mpls: No enough memory	Internal data memory supplement was failed.
mpls: number of CRLSP should be less than	The upper limit for CRLSP is 255.
256
mpls: range should not be less than label	platform_label_range value is invalid. For the “range”, set a value
	greater than that for the label.
mpls: The interface is neither ethernet nor	The specified interface is neither Ethernet nor gigabit Ethernet.
gigabit_ethernet.	Set an Ethernet or gigabit Ethernet interface.
mpls: too many MPLS definitions	The MPLS information has exceeded the maximum allowance.
Multcast and MPLS can not be set up	Multcast and MPLS can not be set up simultaneously
simultaneously.
policy_mpls :’ <LSP Name>’ is invalid.	The name of LSP specified for a policy_mpls parameter of the flow
	filter must have been defined for label_switched_path. For the name
	of LSP specified for a policy_mpls parameter of the flow filter, use
	one already defined for label_switched_path. To delete from
	label_switched_path the name of LSP specified for a policy_mpls
	parameter of the flow filter, delete the policy_mpls parameter
	beforehand.
	<LSP name>: Specified LSP name
policy_mpls :’ <LSP Name>’ syntax error	The length of the LSP name specified for a policy_mpls parameter of
	the flow filter is illegal. For the name, use 1 to 14 characters.
	<LSP name>: Specified LSP name
secondary_label_switched_path: duplicate	This is a duplicated definition.
explicit_route_name in ’<LSP name>’
	<LSP name>: Specified LSP name

5-86	GR2K-GA-0014
	Ver. 07-02