Extreme Networks 17001 manual Summit X450e-48p Switch Front Panel

Summit Family Switches

Summit X450e-48p Switch

The front panel of the Summit X450e-48p switch (Figure 45) includes:

●Forty-four fixed autosensing 10/100/1000 BASE-T PoE ports (ports 1-44) that provide high-density copper connectivity and a full 15.4 Watts of PoE per port when used with the EPS-C/EPS-600LS

●Four combination ports (ports 45-48) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16. For information about SFPs, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

NOTE

All 48 ports can provide PoE power

●LEDs to indicate port status and switch operating conditions.

For a description of the LEDs and their operation, see “Summit X450, X450a, and X450e Series Switch LEDs” on page 58.

●Stack number indicator showing the position of this switch in a stacked configuration.

●Serial console port used to connect a terminal and perform local management.

Figure 45: Summit X450e-48p Switch Front Panel

																																													Combination ports
	Stack	10G	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24	25	26	27	28	29	30	31	32	33	34	35	36	37	38	39	40	41	42	43	44	45	46	47	48	45X	46X	47X	48X Solid ON = Link
	1	1																																																				Blinking = Activity
	2	2
MGMT
FAN	STACK NO.
PSU-1
PSU-E

Shared Ports

Console

Stack number 10/100/1000 Mbps portsport indicator

SH 030B

The rear panel of the Summit X450e-48p switch (Figure 46) includes:

●Slot for one of the following Summit option cards:

■Summit XGM2-2xn option card, which allows you to add up to two 10-gigabit XENPAK modules

■Summit XGM2-2xf option card, which allows you to add up to two 10-gigabit XFP modules

For information about these Summit option cards, see “Summit XGM2-2xn Option Card” on page 197 or “Summit XGM2-2xf Option Card” on page 198.

●Management port with associated LEDs

●Two high-performance stacking ports with associated LEDs

●Redundant power input connector for optional connection to the EPS-C chassis (Model No. 10912). This chassis can hold up to three EPS-600LS External Power Modules (Model No. 10913). The connecting redundant power supply cable is shipped with the EPS-C chassis.

The PoE capability of the Summit X450e-48p switch varies depending on the number of external power modules in use. For more information, see “Summit X450e-48p Power Supplies” on page 57 and “EPS-600LS External Power Module” on page 77.

●AC power input socket

The power supply operates from 100 VAC to 240 VAC.

56 Summit Family Switches Hardware Installation Guide