Extreme Networks 17001 manual Removing the Front Mounting Screws from a Two-Post Rack

Figure 143: Removing the Front Mounting Screws from a Two-Post Rack

SH_100

4Remove the screws holding the front mounting brackets to the sides of the switch, and set the mounting brackets aside.

5Support the front and back of the switch as you slide the switch back, off the rear mounting brackets, and out of the rack (Figure 144).

Set the switch on a secure work surface.

Figure 144: Removing the Switch from a Two-Post Rack

SH_101

Summit Family Switches Hardware Installation Guide 167