Extreme Networks 17001 manual Summit X250e-48p Switch Front Panel

Summit Family Switches

Summit X250e-48p Switch

The front panel of the Summit X250e-48p switch (Figure 21) includes:

●Forty-eight fixed autosensing 10/100BASE-T PoE ports (ports 1–48). In addition to 4.8 Gbps of high-density copper connectivity, these ports provide a full 15.4 Watts of PoE per port when used with the EPS-600LS External Power Module.

●Two combination ports (ports 49–50) using RJ-45 connectors and SFPs to provide 2 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16.

For information about SFPs, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

●LEDs to indicate port status and switch operating conditions.

For a description of the LEDs and their operation, see “Summit X250e Series Switch LEDs” on page 34.

●Stack number indicator showing the position of this switch in a stacked configuration.

●Serial console port used to connect a terminal and perform local management.

Figure 21: Summit X250e-48p Switch Front Panel

10/100 Mbps ports	Console
		port

Stack number indicator Combination ports

SH_042B

The rear panel of the Summit X250e-48p switch (Figure 22) includes:

●Management port with associated LEDs

●Two high-performance stacking ports with associated LEDs

●Redundant power input connector for use with one or more EPS-600LS External Power Modules (Model No. 10913) installed in an EPS-C chassis (Model No. 10912).

The PoE capability of the Summit X250e-48p switch varies depending on the number of external power modules in use. For more information, see “EPS-600LS External Power Module” on page 77. The connecting redundant power supply cable is shipped with the EPS-C chassis.

●AC power input socket.

The internal AC power supply operates from 100 VAC to 240 VAC.

Figure 22: Summit X250e-48p Switch Rear Panel

	External power
Management port	supply connection

	10 Gigabit	Power socket
	stacking ports
		SH 043
32
		Summit Family Switches Hardware Installation Guide