Extreme Networks 17001 manual Installing an EPS-C Chassis, EPS-C and Summit Switch

Installing Summit External Power Supplies

Installing an EPS-C Chassis

CAUTION

Do not use the rack mount brackets to suspend the EPS-C from under a table top or desk, or to attach the EPS-C unit to a wall.

The EPS-C is intended for use only with a Summit X450e-48p or X250e-48p switch. You can install the EPS-C above or below the Summit switch (see Figure 161).

Figure 161: EPS-C and Summit Switch

ESP-C

EPS-C

PSU1 PSU2 PSU3

DC good

AC good

	Stack	10G	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24	25	26	27	28	29	30	31	32	33	34	35	36	37	38	39	40	41	42	43	44	45	46	47	48	45X	46X	47X	48X Solid ON = Link
	1	1																																																				Blinking = Activity
	2	2
MGMT
FAN	STACK NO.
PSU-1
PSU-E
																																																			Shared Ports

Summit X450e-48p Switch

ESP-C_02

To rack-mount the EPS-C:

1Place the EPS-C upright on a secure work surface.

2Remove the mounting bracket kit from the packaging.

3Attach the mounting brackets as follows:

a Place a rack mount bracket over the mounting holes on one side of the unit.

b Insert the provided screws and fully tighten them using a screwdriver (see Figure 162).

Figure 162: Attaching the Mounting Bracket

EPS-C

-C EPS

	Rack Mount Bracket
	EPS-C_01
190	Summit Family Switches Hardware Installation Guide