Extreme Networks 17001 manual Summit X150-24p Switch Front Panel

Summit X150-24p Switch

The front panel of the Summit X150-24p switch (Figure 3) includes:

●Twenty-four fixed autosensing 10/100BASE-T PoE ports (ports 1–24). In addition to 4 Gbps of high-density copper connectivity, these ports also provide a full 15.4 Watts of PoE per port.

●Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16.

For information about SFPs, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

●LEDs to indicate port status and switch operating conditions.

For a description of the LEDs and their operation, see “Summit X150 Series Switch LEDs” on page 21.

●Serial console port used to connect a terminal and perform local management.

Figure 3: Summit X150-24p Switch Front Panel

	Console
10/100 Mbps ports		port

Combination ports

SH_052A

The rear panel of the Summit X150-24p switch includes:

●Ethernet management port with associated LEDs

●Redundant power input connector for use optional connection to the EPS-500 External Power Supply (Model No. 10911) with full PoE power support.

See “EPS-500 External Power Supply Unit” on page 76 for more information. The connecting redundant power supply cable is shipped with the EPS-500 unit.

●AC power input socket

Figure 4: Summit X150-24p Switch Rear Panel

	External power
Management port	supply connection

Power socket

SH_053

Summit Family Switches Hardware Installation Guide 19