Extreme Networks 17001 manual Connecting a SummitStack 128G Cable

Building a SummitStack Configuration

To connect a SummitStack 128G cable:

1Holding the cable connector with the release tab on top, align the connector with the stacking port on the VIM1 module in the Summit X650 series switch (Figure 80).

Figure 80: Connecting a SummitStack 128G Cable

SH_121

2Firmly press the cable connector into the stacking port until the spring latch on top of the connector clicks into place.

3Repeat steps 1 and 2 to connect the other end of the cable.

110 Summit Family Switches Hardware Installation Guide