Extreme Networks 17001 manual Installing the Switch in a Cabinet or Four-Post Rack

Installing Summit Family Switches

After the switch is secured to the rack, install and connect power supplies as described in “Installing a Summit X650 AC Power Supply” on page 157 or “Installing a Summit X650 DC Power Supply” on page 158.

Installing the Switch in a Cabinet or Four-Post Rack

To install the switch in a cabinet or four-post rack:

1At the back of the cabinet, attach a rear mounting bracket to each rear post, as shown in Figure 129

Figure 129: Attaching Rear Mounting Brackets—Cabinet Installation

SH_102

2Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate ground point on the rack.

3Set the switch on a secure work surface.

4At the front of the switch, attach a rack-mounting bracket to each side (Figure 130). Position the bracket with the flange at the front edge of the switch.

154 Summit Family Switches Hardware Installation Guide