Extreme Networks 17001 manual Removing the Rear Mounting Brackets-Two-Post Rack

Installing Summit Family Switches

6Remove the rack-mounting screws and detach the rear mounting brackets from the rack post (Figure 145).

Figure 145: Removing the Rear Mounting Brackets—Two-Post Rack

SH_097

Removing a Summit X650 Series Switch from a Cabinet or Four-Post Rack

Removing the Summit X650 switch from a cabinet or rack requires two people to maneuver the switch and disconnect the mounting hardware.

To remove the Summit X650 series switch from a cabinet or four-post rack:

1Attach an ESD-preventive wrist strap to your wrist and connect the metal end to an appropriate ground point on the rack.

2Disconnect all power cords from the back of the switch.

3Remove all installed power supplies:

a Push the latching tab to the left as you pull the handle to disengage the power supply from its internal connectors.

b Carefully slide the power supply out of the switch and set it aside.

4Support the front of the switch while you remove the front rack mounting screws (Figure 146).

5Carefully slide the switch forward out of the cabinet and off the rear mounting brackets.

168 Summit Family Switches Hardware Installation Guide