Extreme Networks 17001 manual Summit X350-24t Switch Front Panel

Summit X350-24t Switch

The front panel of the Summit X350-24t switch (Figure 23) includes:

●Twenty fixed autosensing 10/100/1000BASE-T ports (ports 1–20) that provide 20 Gbps of high-density copper connectivity

●Four combination ports (ports 21-24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16. For information about SFPS, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

●LEDs to indicate port status and switch operating conditions. For a description of the LEDs and their operation, see Table 10.

●Serial console port used to connect a terminal and perform local management.

Figure 23: Summit X350-24t Switch Front Panel

10/100/1000 Mbps ports	Console
		port

Combination ports

SH_064

The rear panel of the Summit X350-24t switch (Figure 24) includes:

●Slot for the one of the following Summit option cards:

■Summit XGM2-2xf option card, which allows you to add one or two 10-gigabit XFP modules See “Summit XGM2-2xf Option Card” on page 198.

■Summit XGM2-2xn option card, which allows you to add one or two 10-gigabit XFP modules See “Summit XGM2-2xn Option Card” on page 197

■Summit XGM2-2bt option card, which allows you to add one or two fixed 10GBASE-T ports See “Summit XGM2-2bt Option Card” on page 199

■Summit XGM2-2sf option card, which allows you to add one or two 10-gigabit SFP+ modules See “Summit XGM2-2sf Option Card” on page 199

●Management port with associated LEDs

●Redundant power input connector for optional connection to the EPS-500 External Power Module (Model No. 10907).

See “EPS-500 External Power Supply Unit” on page 76 for more information. The connecting redundant power supply cable is shipped with the EPS-500 unit.

●AC power input socket

The power supply operates from 100 VAC to 240 VAC.

Summit Family Switches Hardware Installation Guide 37