Extreme Networks 17001 manual Summit X450 Series Switches, Summit X450-24t Switch

Summit Family Switches

Summit X450 Series Switches

The Summit X450 series switches are 24-port switches without PoE options. The ports are implemented as fixed 10/100/1000BASE-t RJ-45 ports or as installable SFP modules. These switches are available only with AC internal power supplies.

The Summit X450 series of switches consists of the following switches:

●Summit X450-24t Switch

●Summit X450-24x Switch

Summit X450-24t Switch

The front panel of the Summit X450-24t switch (Figure 27) includes:

●Twenty fixed autosensing 10/100/1000BASE-T ports (ports 5-24) that provide 20 Gbps of high-density copper connectivity

●Four combination ports (ports 1-4) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16. For information about SFPS, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

●LEDs to indicate port status and switch operating conditions.

For a description of the LEDs and their operation, see “Summit X450, X450a, and X450e Series Switch LEDs” on page 58.

●Stack number indicator showing the position of this switch in a stacked configuration.

●Serial console port used to connect a terminal and perform local management.

Figure 27: Summit X450-24t Switch Front Panel

			Console
	Mini-GBIC ports	10/100/1000 Mbps ports	port
	Band On = Link
	Blinking = Activity
STACK NO.
	Shared Ports
Stack number
indicator	Combination ports
			S450_002D

The rear panel of the Summit X450-24t switch (Figure 28) includes:

●Slot for the Summit XGM-2xn option card, which allows you to add one or two 10-gigabit XENPAK modules

For information about the Summit XGM-2xn option card, see “Summit XGM-2xn Option Card” on page 196.

●Management port with associated LEDs

●Two high-performance stacking ports with associated LEDs

42 Summit Family Switches Hardware Installation Guide