Extreme Networks 17001 manual Installing a Summit X650 Series Switch

Figure 123: Removing the Switch from a Four-Post Rack

SH_148

5Set the switch on a secure work surface. Using a #1 Phillips screwdriver, remove the front mounting brackets from the sides of the switch.

6Remove the rear mounting brackets from the rear rack posts.

Installing a Summit X650 Series Switch

The Summit X650 series switch fits into a standard 19-inch equipment rack. The provided rack-mounting brackets are adaptable to either two-post or four-post (cabinet) mounting.

The installation process includes the following tasks:

1Install the switch in the rack.

2Install one or two power supplies and connect power cables.

3Connect network interface cables.

If you are installing Summit X650 series switches for use in a SummitStack configuration, read Chapter 2, “Building a SummitStack Configuration,” before you install the switches.

Summit Family Switches Hardware Installation Guide 149