|
| Fault codes | 29 |
Fault codes | Possible causes | What to do |
|
F1 | Flood switch has been | Turn off the water supply to the |
|
| activated. | DishDrawer® and call your Authorised |
|
|
| Service Centre or Customer Care. |
|
F2 | Motor problem. | Call your Authorised Service Centre or |
|
|
| Customer Care. |
|
F3 | Temperature sensor | Ensure water coming in through the inlet |
| failed. | hose is less than 65 oC. You may need to |
|
| install a tempering valve on your water |
|
| supply. |
F4 | Faulty temperature | Call your Authorised Service Centre or |
| sensor or element. | Customer Care. |
F5 | Lid fault. | Plug the DishDrawer back in or turn it on |
|
| at the power supply. Fault may reset. |
F6 | Lid fault. | Plug the DishDrawer back in or turn it on |
|
| at the power supply. Fault may reset. |
F7 | Lid fault. | Plug the DishDrawer back in or turn it on |
|
| at the power supply. Fault may reset. |
F9 | Electronics | Call your Authorised Service Centre or |
| malfunction. | Customer Care. |
