26
Troubleshooting
Problem | Possible cause | What to do |
Unclean dishes | Wash programme | See section ‘Wash programmes and |
| unsuitable for the load. | detergent quantities’ for a suitable wash |
|
| programme, or the soils were too heavily |
|
| baked on and dishes may need soaking. |
| Spray arm(s) unable to | Ensure no items are obstructing the spray |
| rotate. | arm path. |
| DishDrawer® overloaded/ | Refer to the section on loading. |
| incorrectly loaded. |
|
| Drain filter is incorrectly | See section ‘User maintenance instructions’ |
| inserted. |
|
| Detergent put in the | Detergent for the main wash must be placed |
| wrong compartment of the | in the large compartment. See section |
| dispenser. | ‘Detergent dispenser’ for information. |
| Excess food not removed | Scrape all food scraps off dinnerware prior to |
| from dinnerware prior to | loading. |
| loading. |
|
| Unsuitable detergent. | Use recommended brands of dishwasher |
|
| detergent. |
| Not enough detergent. | See section ‘Wash programmes and |
|
| detergent quantities’ or follow the detergent |
|
| manufacturer’s instructions. |
| Spray arm holes are blocked. | Clean the spray arm. |
|
|
|
| Drain filter is blocked. | Clean the filter plate and drain filter. |
|
|
|
Foaming | Incorrect amount of | See section ‘Wash programmes and |
| detergent. | detergent quantities’ or follow the detergent |
|
| manufacturer’s instructions. |
| Too much egg in the wash | Increase the amount of detergent. |
| load. |
|
| Rinse aid setting too high. | Decrease the rinse aid setting. |
|
|
|
Water leaking | Drain hose disconnected | Reconnect the drain hose to the waste pipe. |
| from waste pipe. |
|
| Water inlet hose not | Ensure the inlet hose is connected securely. |
| properly connected. |
|
| Other leaks. | Turn water and power supplies to the |
|
| DishDrawer® off. Call your dealer or |
|
| Authorised Service Centre. |
DishDrawer® will Childlock feature is on or
not openthe Closed drawer option is on, or both.
Turn the Childlock off. Hold down the
/
button until the light above the
/
button disappears and/or press the
/ 
button to open the DishDrawer®.
Power failure during | Wait until power resumes, cycle will restart in |
cycle | same part of wash programme. |
|
|
