30
Fault codes
Fault codes | Possible causes | What to do |
| |
U1 | Fill fault due to... |
| Check if there is water in the | |
|
|
| DishDrawer and follow the relevant | |
|
|
| steps below. |
|
|
| If there is no water in the DishDrawer: | ||
| ...water supply not | 1 | Turn on the water supply to the | |
| being turned on. |
| DishDrawer. |
|
|
| 2 | Plug the DishDrawer back in or turn | |
|
|
| it on at the power supply. | |
| OR |
|
|
|
|
| If there is water in the DishDrawer: | ||
| ...spray arm(s) not | 1 | Plug the DishDrawer back in or turn | |
| being fitted correctly. |
| it on at the power supply. | |
|
| 2 | Press the | button and wait for 30 |
|
|
| seconds. |
|
|
| 3 | Press the | / button. The |
|
|
| DishDrawer will automatically drain | |
|
|
| (approx. 2 minutes). You may need to | |
|
|
| repeat steps 2 and 3 again. | |
|
| 4 | When the DishDrawer is empty, | |
|
|
| check that the spray arm is correctly | |
|
|
| fitted and can rotate freely. See ‘User | |
|
|
| maintenance instructions’. | |
|
|
|
|
|