24
User maintenance instructions
Important!
Disconnect the DishDrawer® from the power supply and allow all its parts to cool before any cleaning or maintenance.
Cleaning the surfaces
Important!
We do not recommend the use of the following cleaning aids on your DishDrawer® as they may damage the surfaces:
Plastic or stainless steel scouring pads | Abrasive, solvent, household cleaners |
Acid or alkaline cleaners | Hand washing liquids or soap |
Stainless steel cleaners or polishes | Laundry detergents or disinfectants |
1Wipe with a clean damp cloth. Take care not to wet the control panel.
2 Dry with a clean
Cleaning the drain filter, spray arms and filter plate | Wash pump housing | |
We recommend that the drain filter is cleaned |
|
|
whenever there is evidence of food particles. |
|
|
The spray arms may need cleaning about once a month |
|
|
in normal use or more often should the need arise. |
|
|
The filter plate should not normally need cleaning. |
| Spray |
Food particles remaining on its surface can be wiped |
| |
| arm | |
off with a clean, damp cloth. |
|
|
Important ! | Filter | Drain filter |
If a dishwasher cleaner/descaler is used, you must run | plate | |
a wash programme with detergent immediately |
|
|
afterward to prevent any damage to your DishDrawer®. |
|
|
The DishDrawer® must be used with the filter plate, |
|
|
drain filter and spray arm correctly in place. |
|
|
Cleaning the drain filter
1 Unplug the DishDrawer® or turn it off at the power supply.
2 Ensure the tines above the drain filter are in the upright position.
3Lift and remove the drain filter. It is normal to find some
water under it.
4 Empty, rinse clean under running water and replace back into the allocated space.
5 Ensure the drain filter is flush with the filter plate.
6 Plug the DishDrawer® back in or turn it on at the power supply.