Extreme Networks 17001 manual Summit XGM2-2xn Option Card, Mixing ZR XENPAKs with Other Types

Mixing ZR XENPAKs with Other Types

Table 31 lists the supported combinations of XENPAK types using ZR XENPAKs in a Summit X450 series switch. You can either install one ZR XENPAK and leave one slot empty or install one ZR XENPAK and one SR XENPAK; the Summit X450 series switch does not support any other XENPAK combinations when a ZR XENPAK module is installed. You must put the specified modules in the specified slots, as shown in Table 31, for the switch to discover the ZR XENPAK correctly.

.

Table 31: Summit X450 ZR XENPAK Combinations

Left Slot	Right Slot
ZR XENPAK	Empty
ZR XENPAK	SR XENPAK

Summit XGM2-2xn Option Card

The Summit XGM2-2xn option card allows you to add up to two 10-gigabit XENPAK modules to the following switches:

●Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)

●Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)

●Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)

●Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)

The Summit XGM2-2xn option card is compatible with the following 10-gigabit XENPAK modules:

●SR XENPAK module, operating in the 850 nm range

●LR XENPAK module, operating in the 1310 nm range

●ER XENPAK module, operating in the 1550 nm range

●ZR XENPAK module, operating in the 1550 nm range

●LX-4 XENPAK module, operating in the 1269-1355 nm range

●LW XENPAK module, operating in the 1310 nm range

Figure 167 shows the Summit XGM2-2xn option card.

Summit Family Switches Hardware Installation Guide 197