Maintenance
Warning! Always disconnect the tool from the air compressor and then empty the magazine of nails or staples before attempting to inspect or perform maintenance to the Nailer/ Stapler.
1.Inspect all of the nuts and screws and make sure they are securely fastened.
2.Periodically lubricate the driving mechanism and magazine with a light oil. Wipe down with a clean cloth. Never use gasoline or flammable solvents to clean the tool.
3.Inspect your air compressor according to manufacturer’s instructions.
Warning! If you detect any air leaks, power loss, the Nailer/Stapler skips driving, drives too deep, or not deep enough, take the Nailer/Stapler to a qualified service technician.
Parts List
Part | Description |
| Part | Description |
| Part | Description |
1 | Exhaust Deflector |
| 44 | Hex Bolt |
| 71 | Cylinder Pin |
3 | Hex. Bolt |
| 45 | Stopper |
| 72 | Magazine Tail Cover |
4 | Head Cap |
| 46 | Compression Spring |
| 73 | Lock Nut |
5 | Seal |
| 47 | Safety Cover |
| 74 | Hand Grip |
6 | Internal Lining |
| 48 | Safety Cover Bolt |
| 75 | |
7 |
| 49 | Spacer |
| 76 | End Cap | |
8 | Compression Spring |
| 50 | Driver Cover |
| 77 | Air Plug |
9 | Gasket |
| 51 | Hex. Bolt |
| 78 | Collar |
10 |
| 52 | Driver Guide |
| 79 | Fixed Ring | |
11 | Head Valve Piston |
| 53A | Magazine B |
| 80 | |
12 |
| 54 | Steel Bar |
| 81 | Ling Ring | |
13 |
| 55 | Pusher Unit |
| 82 | ||
14 |
| 56 | Spring Holder |
| 83 | Cylinder | |
16 |
| 58 | Spring |
| 84 | Ling Ring | |
17A | Piston & Driver |
| 59 | Spring Washer |
| 85 | Bumper |
25 | Body |
| 60 | Hex Bolt |
| 86 | Seal |
26 | Nozzle |
| 61 | Magazine A |
| 87 | Trigger Valve Upper |
34 | Spring |
| 62 | Magazine Bracket |
| 88 | Spring |
36 | Spring Pin |
| 63 | Hex Bolt |
| 89 | |
37 |
| 64 | Hex Bolt |
| 90 | Trigger Plunger | |
38 | Trigger |
| 65 | Lock Nut |
| 91 | Trigger Plate |
39 | Pin |
| 66 | Retainer Pin |
| 92 | Trigger Valve Lower |
40 | Safety Guide |
| 67 | Latch |
| 93 | Trigger Plate |
41 | Spring Pin |
| 68 | Spring |
|
|
|
42 | Safety |
| 69 |
|
|
| |
43 |
| 70 | Hex Bolt |
|
|
|
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 97525 | For technical questions, please call | Page 9 |
