Extreme Networks 17001 manual Summit X250e-24xDC Switch Front Panel

Summit Family Switches

Summit X250e-24xDC Switch

The front panel of the Summit X250e-24xDC switch (Figure 7) includes:

●Twenty-four 100BASE-FX ports (ports 1–24) that provide 2.4 Gbps of high-density fiber connectivity

●Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16. For information about SFPs, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

●LEDs to indicate port status and switch operating conditions.

For a description of the LEDs and their operation, see “Summit X250e Series Switch LEDs” on page 34.

●Stack number indicator showing the position of this switch in a stacked configuration.

●Serial console port used to connect a terminal and perform local management.

Figure 15: Summit X250e-24xDC Switch Front Panel

Combination ports

DC

Stack number			Console
indicator	100BASE-X ports		port
		SH_059_front_x250e-24xdc

The rear panel of the Summit X250e-24xDC switch (Figure 8) includes:

●Management port with associated LEDs

●Two high-performance stacking ports with associated LEDs

●Redundant power input connector for use with the EPS-150DC External Power Module (Model No. 10909).

See “EPS-150DC External Power Module (with EPS-T2)” on page 76 for more information. The connecting redundant power supply cable is shipped with the EPS-150DC unit.

●DC power input socket

The power supply operates from -36 VDC to -72 VDC.

●Grounding lug

NOTE

For centralized DC power connection, this product is intended to be installed in a restricted access location (such as a dedicated equipment room, equipment closet, or central office) in accordance with Articles 110-16, 110-17, and 110-18 of the National Electric Code, ANSI/NFPA 70.

28 Summit Family Switches Hardware Installation Guide