Extreme Networks 17001 manual Connecting the 128G/64G Cable

Building a SummitStack Configuration

At the Summit X650 series switch, connect the 128G connector to the VIM1-SummitStack256 module. At the Summit X480 series switch, connect the 64G connector to the VIM2-SummitStack128 module.

The connection process is the same for each connector and the compatible VIM model.

To connect a 128G or 64G connector:

1Holding the cable connector with the release tab on top, align the connector with the stacking port on the VIM1 (Figure 85).

Figure 85: Connecting the 128G/64G Cable

	SH_171
128G Connector and	64G Connector and	SH_164
VIM1-SummitStack256	VIM2-SummitStack128
Module	Module

2Firmly press the cable connector into the stacking port until the spring latch on top of the connector clicks into place.

114 Summit Family Switches Hardware Installation Guide