Extreme Networks 17001 manual Summit X450a-24tDC Switch Front Panel

Summit X450a-24tDC Switch

The front panel of the Summit X450a-24tDC switch (Figure 33) includes:

●Twenty fixed autosensing 10/100/1000 BASE-T ports (ports 1-20) that provide 20 Gbps of high-density copper connectivity

●Four combination ports (ports 21-24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper or fiber connectivity

For more information about combination ports, see “Combination Ports and Failover” on page 16.

For information about SFPs, see the Extre me Ne tworks Pluggable Inte rface Module s Installation Guide .

●LEDs to indicate port status and switch operating conditions.

For a description of the LEDs and their operation, see “Summit X450, X450a, and X450e Series Switch LEDs” on page 58.

●Stack number indicator showing the position of this switch in a stacked configuration.

●Serial console port used to connect a terminal and perform local management.

Figure 33: Summit X450a-24tDC Switch Front Panel

																													Console
						10/100/1000 Mbps ports																							port
		1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23	24	21X	22X	23X	24X
		Solid ON=Link
		Blinking=Activity
	10G
MGMT	1
FAN	2	STACK NO.
	Stack
PSU-1	1
PSU-E	2																									Shared Ports

Stack number
indicator	Combination ports

SH_020B

The rear panel of the Summit X450a-24tDC switch (Figure 34) includes:

●Slot for one of the following Summit option cards:

■Summit XGM2-2xn option card, which allows you to add up to two 10-gigabit XENPAK modules

■Summit XGM2-2xf option card, which allows you to add up to two 10-gigabit XFP modules

For information about these Summit option cards, see “Summit XGM2-2xn Option Card” on page 197 or “Summit XGM2-2xf Option Card” on page 198.

●Ethernet management port with associated LEDs

●Two high-performance stacking ports with associated LEDs

●Redundant power input connector for optional connection to the EPS-150DC External Power Module (Model No. 10909).

See “EPS-150DC External Power Module (with EPS-T2)” on page 76 for more information. The connecting redundant power supply cable is shipped with the EPS-150DC unit.

●DC power input socket

The power supply operates from -36 VDC to -72 VDC.

●Grounding lug

Summit Family Switches Hardware Installation Guide 47