Extreme Networks 17001 manual VIM1-SummitStack512 Versatile Interface Module

VIM1-SummitStack512 Versatile Interface Module

The VIM1-SummitStack512 versatile interface module (Figure 62) provides four 128-Gbps stacking ports that are used to cross-connect two Summit X650 series switches. Each switch must have an installed VIM1-SummitStack512 module. To connect these ports, you must use stacking cables with compatible connectors, available from Extreme Networks.

The VIM1-SummitStack512 module requires ExtremeXOS 12.3.3 software (or later) installed on the Summit X650 series switch.

Figure 62: VIM1-SummitStack512 Versatile Interface Module

Stacking

ports

Stacking

ports

LEDs SH_140

VIM1-SummitStack256 Versatile Interface Module

The VIM1-SummitStack256 versatile interface module (Figure 63) provides two 128-Gbps SummitStack stacking ports. To connect these ports, you must use stacking cables with compatible connectors, available from Extreme Networks.

The VIM1-SummitStack256 module requires ExtremeXOS 12.4.1 software (or later) installed on the Summit X650 series switch.

Figure 63: VIM1-SummitStack256 Versatile Interface Module

Stacking

port

Stacking port

LEDs

SH_168

Summit Family Switches Hardware Installation Guide 71