Extreme Networks 17001 manual Summit External Power Supplies, EPS-LD External Power Supply Model

Summit External Power Supplies

The following external power supplies are available for use with Summit X159 series, X250e series, X450 series, X450a series, and X450e series switches:

●EPS-LD external power supply (Table 45)

●EPS-160 external power module (used with EPS-T chassis) (Table 46)

●EPS-500 external power supply (Table 48)

●EPS-600LS external power module (used with EPS-C chassis) (Table 49)

●EPS-150DC external power supply (used with EPS-T2 chassis) (Table 50)

Table 45: EPS-LD External Power Supply (Model 45019)

For use with the Summit X450a-24t and X450e-24p switches

Operational voltage range	90	to 264 V
Nominal input ratings	100 to 240 V , 50 to 60 Hz, 10 A
Input Current	6 A at 100 V , 2.5 A at 240 V
Line frequency range	47	to 63 Hz
Maximum inrush current	30	A at 115 V , 60 A at 230 V
Output	-50 V			, 7.5 A max, 375 Watts
	12	V	, 7.5 A max, 90 Watts
Power supply cord type	AC
Power supply input socket	IEC 320 C14
Power cord input plug	IEC 320 C13
Power cord wall plug	Refer to “Selecting Power Supply Cords” on page 218.
Power supply cord gauge	18	AWG (0.75 mm2) up to 6 feet or 2 meters
	or	AWG (1.0 mm2) over 6 feet
	16
Efficiency	>75% at 100% load
Heat dissipation, Watts, BTU/hr	123 W, 419.7 BTU/hr
Power consumption, Watts, BTU/hr	588 W, 2006.3 BTU/hr
Ambient operating temperature	0° C to 40° C (32° F to 104° F)

Maximum continuous DC output shall not exceed 465 Watts.

Table 46: EPS-160 External Power Module (Model 10907)

For use with the Summit X150-24t, X150-48t, X250e-24t, X250e-24x, X250e-48t, X450-24t, and X450-24x switches

Operational voltage range	90	to 264 V
Nominal input ratings	100 to 250 V, 4 to 2 A, 47 to 63 Hz
Line frequency range	47	to 63 Hz
Input current	2 A at 100 V
	1 A at 240 V
Line frequency	50 to 60 Hz
Maximum inrush current	30	A at 115 V , 50 A at 230 V

Summit Family Switches Hardware Installation Guide 261