Extreme Networks 17001 manual Installing the EPS-600LS Unit in the EPS-C Chassis

Installing Summit External Power Supplies

Figure 164: Installing the EPS-600LS Unit in the EPS-C Chassis

! See Manual

O.T.P

DC OK

AC OK

EPS-C_04A

3Slide the unit completely into the chassis until the front of the EPS-600LS is flush with the surface of the EPS-C (see Figure 165).

4Tighten the two captive screws on the EPS-600LS unit into the EPS-C (see Figure 165). This secures the unit in place.

Figure 165: Securing the EPS-600LS to the EPS-C Chassis

Tighten Screws

EPS-600LS

O.T.P

DC OK

! See Manual AC OK

EPS-C_05A

5Connect an appropriate AC power cord to the AC connector on the EPS-600LS unit (see Figure 166). Use the cable clip on the EPS-600LS unit to hold the AC power cord in place (see Figure 166).

192 Summit Family Switches Hardware Installation Guide