Extreme Networks 17001 manual Installing a VIM1 Module VIM1-SummitStack Module Shown

Maintenance Procedures for Summit X650 and Summit X480 Series Switches

5Install the replacement VIM in the switch (Figure 181):

a Make sure the inserter/ejector levers are rotated down.

b Carefully slide the module into the switch until the inserter/ejector levers begin to rotate upward. c Simultaneously rotate both levers upward to seat the module internal connectors.

d Insert and tighten the retaining screws you removed earlier.

Figure 181: Installing a VIM1 Module (VIM1-SummitStack Module Shown)

SH_093

212 Summit Family Switches Hardware Installation Guide