Accessory Storage Holder
Installing Accessory Storage Holder
1.Position rods of accessory storage holder directly over accessory rod receptacles in dust drum.
2.Slide accessory storage holder into accessory rod receptacles until fully seated with holder clips locked.
Accessory Storage
Holder Clips
Accessory
Storage
Holder
Accessory
Holder
Receptacles
Removing Accessory Storage Holder
Push in both accessory storage holder clips and then pull straight up on rods of accessory storage holder.
Accessory Storage | Accessory | |
Holder Clips | ||
Storage | ||
| ||
| Holder |
Accessory
Holder
Receptacles
Accessory Storage
Your accessory storage holder has been designed to hold all the accessories included with your vac. The accessories and hose should be stored as shown.
NOTE: Insert female end of extension wand into the holder sleeve as shown.
Cord Wrap
When vacuuming is complete, unplug the cord and wrap it around the power assembly as shown. The cord should wrap under the pull handle (above the inlet) and around and under the cord wrap of the motor cover.
Push/Pull Handle
Cord Wrap
Power
Cord
| Accessory | |
Female End | Storage | |
Holder | ||
of Extension | ||
| ||
Wand | 8 |
