Removing and reinstalling the software

For more information, see “Printing photos stored on a memory card using the proof sheet” on page 38.

Only one device or media card is allowed...

The printer can read only one memory card at a time.

1Remove both memory cards.

2Reinsert only one memory card.

Paper skewed, please reposition.

The photo proof sheet is placed incorrectly on the scanner glass.

For more information, see “Loading original documents on the scanner glass” on page 30.

Change paper size setting...

There are one or more photos larger than the paper size you selected.

For more information, see “Change paper or photo size setting...” on page 72.

PictBridge Communications Error

Make sure your PictBridge-enabled digital camera is inserted correctly into the printer.

For more information, see “Using a PictBridge-enabled digital camera to control printing photos” on page 37.

Please remove your camera to use your memory card

The printer can read either a PictBridge-enabled digital camera or a memory card, not both at the same time.

1Remove both the PictBridge-enabled digital camera and the memory card.

2Reinsert only one of the devices mentioned above.

Some photos removed from card by host

Some of the photos on the photo proof sheet were deleted from the memory card through the computer. You need to print a new photo proof sheet.

For more information, see “Printing photos stored on a memory card using the proof sheet” on page 38.

There is a problem reading the memory card...

The memory card was inserted incorrectly or is damaged.

1Check for any obvious damage to the memory card.

2Reinsert the memory card. See “Inserting a memory card” on page 36 to determine which slot accommodates your memory card and to see instructions on how to insert it.