Computer not connected
Make sure your computer is connected and turned on.
1Check the USB cable for any obvious damage.
2Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol.
3Firmly plug the square end of the USB cable into the USB port on the back of the printer.
Insert camera/memory card.
No PictBridge-enabled digital camera or memory card was detected by the printer.
For more information, see “Using a PictBridge-enabled digital camera to control printing photos” on page 37 or
“Inserting a memory card” on page 36.
Invalid photo/paper size selection
You have selected more than one option on step 2 of the photo proof sheet you printed and scanned.
1Make sure you completely fill in only one circle for each option.
2Press to continue.
Load paper...
1Load paper.
2Press .
No images have been selected.
You have not selected any of the options on step 1 of the photo proof sheet you printed and scanned.
1Make sure you completely fill in your selected circle or circles.
2Press to continue.
No photo/paper size selection has been made.
You have not selected any of the options on step 2 of the photo proof sheet you printed and scanned.
1Make sure you completely fill in your selected circle or circles.
2Press to continue.
No photo files found
No supported images have been found on the memory card.
1Remove the memory card.
2Use only memory cards containing photos created in your digital camera using the JPEG format.
For more information, see the documentation that came with your camera.
No proof sheet information
The photo proof sheet you printed and scanned is no longer valid.
You may have removed the memory card from the printer, or turned off the printer, before scanning the photo proof
sheet.
73